[PATCH 10/12] LED: Add NAND MTD activity LED trigger

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Index: linux-2.6.15/drivers/mtd/nand/nand_base.c
===================================================================
--- linux-2.6.15.orig/drivers/mtd/nand/nand_base.c	2006-01-29 14:37:20.000000000 +0000
+++ linux-2.6.15/drivers/mtd/nand/nand_base.c	2006-01-29 15:25:11.000000000 +0000
@@ -80,6 +80,7 @@
 #include <linux/mtd/compatmac.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
+#include <linux/leds.h>
 #include <asm/io.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -515,6 +516,8 @@
 	return nand_isbad_bbt (mtd, ofs, allowbbt);
 }
 
+INIT_LED_TRIGGER(nand_led_trigger);
+
 /*
  * Wait for the ready pin, after a command
  * The timeout is catched later.
@@ -524,12 +527,14 @@
 	struct nand_chip *this = mtd->priv;
 	unsigned long	timeo = jiffies + 2;
 
+	led_trigger_event(nand_led_trigger, LED_FULL);
 	/* wait until command is processed or timeout occures */
 	do {
 		if (this->dev_ready(mtd))
-			return;
+			break;
 		touch_softlockup_watchdog();
 	} while (time_before(jiffies, timeo));
+	led_trigger_event(nand_led_trigger, LED_OFF);
 }
 
 /**
@@ -817,6 +822,8 @@
 	else
 		 timeo += (HZ * 20) / 1000;
 
+	led_trigger_event(nand_led_trigger, LED_FULL);
+
 	/* Apply this short delay always to ensure that we do wait tWB in
 	 * any case on any machine. */
 	ndelay (100);
@@ -840,6 +847,8 @@
 		}
 		cond_resched();
 	}
+	led_trigger_event(nand_led_trigger, LED_OFF);
+	
 	status = (int) this->read_byte(mtd);
 	return status;
 }
@@ -2724,6 +2733,21 @@
 EXPORT_SYMBOL_GPL (nand_scan);
 EXPORT_SYMBOL_GPL (nand_release);
 
+
+static int __init nand_base_init(void)
+{
+	led_trigger_register_simple("nand-disk", &nand_led_trigger);
+	return 0;
+}
+    
+static void nand_base_exit(void)
+{
+	led_trigger_unregister_simple(nand_led_trigger);
+}
+
+module_init(nand_base_init);
+module_exit(nand_base_exit);
+
 MODULE_LICENSE ("GPL");
 MODULE_AUTHOR ("Steven J. Hill <[email protected]>, Thomas Gleixner <[email protected]>");
 MODULE_DESCRIPTION ("Generic NAND flash driver code");


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux