On Monday January 23, [email protected] wrote:
> NeilBrown wrote:
> > In line with the principle of "release early", following are 5 patches
> > against md in 2.6.latest which implement reshaping of a raid5 array.
> > By this I mean adding 1 or more drives to the array and then re-laying
> > out all of the data.
> >
> I think my question is already answered by this, but...
>
> Would this also allow changing the size of each raid device? Let's say
> I currently have 160 GB x 6, could I change that to 300 GB x 6 or am I
> only allowed to add more 160 GB devices?
Changing the size of the devices is a separate operation that has been
supported for a while.
For each device in turn, you fail it and replace it with a larger
device. (This means the array runs degraded for a while, which isn't
ideal and might be fixed one day).
Once all the devices in the array are of the desired size, you run
mdadm --grow /dev/mdX --size=max
and the array (raid1, raid5, raid6) will use up all available space on
the devices, and a resync will start to make sure that extra space is
in-sync.
NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
