On 12/15/05, Russell King <[email protected]> wrote:
> Reading through the specs I have here, block sizes seem to be all over
> the place. The MMC card specs seem to imply that any block size can
> be set, from 0 bytes to 2^32-1 bytes.
>
> The PXA MMC interface specification allows the block size to be anything
> from 1 to 1023 bytes, excluding CRC. It is unclear whether a value of 0
> means 1024.
>
> The MMCI specification allows the block size to be specified as a power
> of two, from 1 to 2048 bytes, excluding CRC.
By "allows" do you mean we can set the block size to arbitrary values
on MMCI too?
The MMC specification v4.1 is clear in one thing: the SET_BLOCKLEN
command should be issued prior to the actual LOCK_UNLOCK command with
*exactly* the password length + 2 bytes (which contains the operation
mode bits and the password length in bytes). The MMC password
unlocking (and other password operations, FWIW) doesn't work on the
OMAP host if the SET_BLOCKLEN command argument and the block size of
the data transfer itself do not match.
--
Anderson Lizardo
Embedded Linux Lab - 10LE
Nokia Institute of Technology - INdT
Manaus - Brazil
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
