Tomas Carnecky wrote:
My setup: Shuttle XPC Barebone, AMD CPU, two serial ATA disks in a
software raid setup.
When the system is under heavy load (start World of Warcraft, dd
if=/dev/zero of=/part/file etc) I get these messages in dmesg:
ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
ata1: status=0x51 { DriveReady SeekComplete Error }
ata1: error=0x84 { DriveStatusError BadCRC }
over and over, pages with these messages.
BadCRC indicates CRC errors during data transfers on the SATA interface.
This is almost certainly hardware problems - most likely a bad SATA
cable, or maybe a bad drive or motherboard controller.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
