Re: Fw: crash on x86_64 - mm related?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



And yet another crash, this time during boot:


mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
scsi2 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=17
  Vendor: SEAGATE   Model: ST336607LW        Rev: 0007
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdf: 71687372 512-byte hdwr sectors (36704 MB)
SCSI device sdf: drive cache: write back
SCSI device sdf: 71687372 512-byte hdwr sectors (36704 MB)
SCSI device sdf: drive cache: write back
 sdf: sdf1 sdf2 sdf3 sdf4
sd 2:0:0:0: Attached scsi disk sdf
sd 2:0:0:0: Attached scsi generic sg8 type 0
general protection fault: 0000 [1] SMP
CPU 1
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.15-rc5 #1
RIP: 0010:[<ffffffff802a0a04>] <ffffffff802a0a04>{scsi_run_queue+20}
RSP: 0000:ffff81010288be18  EFLAGS: 00010296
RAX: 0000000000000001 RBX: ffff81000c0ad770 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff80222090 RDI: 6b6b6b6b6b6b6b6b
RBP: ffff8100f6fba230 R08: 0000000000000000 R09: ffff81000c0aa198
R10: ffff8100f6f88578 R11: 0000000000000001 R12: 0000000000000292
R13: ffff81000486e3e8 R14: ffff81000486e3e8 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffffff804ee880(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000000101000 CR4: 00000000000006e0
Process swapper (pid: 0, threadinfo ffff81000482e000, task ffff81000482ae00)
Stack: 0000000000000001 ffff81000c0ad770 ffff8100f6fba230 0000000000000292
       0000000000000001 ffffffff802a0c4f ffff81000c0d93b8 ffff8100f6fba230
       0000000000000024 0000000000010000
Call Trace: <IRQ> <ffffffff802a0c4f>{scsi_end_request+207} <ffffffff802a11af>{scsi_io_completion+1039}
       <ffffffff8029c3c6>{scsi_finish_command+150} <ffffffff8029c2dd>{scsi_softirq+333}
       <ffffffff801386eb>{__do_softirq+107} <ffffffff8010eeeb>{call_softirq+31}
       <ffffffff80110781>{do_softirq+49} <ffffffff80110744>{do_IRQ+52}
       <ffffffff8010e10c>{ret_from_intr+0}  <EOI> <ffffffff8038866c>{thread_return+140}
       <ffffffff8010bb1a>{default_idle+58} <ffffffff8010bd61>{cpu_idle+97}


Code: f6 87 cd 01 00 00 80 48 8b 2f 74 05 e8 fb fe ff ff 48 8b 7d
RIP <ffffffff802a0a04>{scsi_run_queue+20} RSP <ffff81010288be18>
 <0>Kernel panic - not syncing: Aiee, killing interrupt handler!

-ryan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux