On Sat, Jun 18, 2005 at 02:26:15PM -0400, Steven Rostedt wrote:
> On Fri, 2005-06-17 at 22:13 -0700, Linus Torvalds wrote:
> > As some people may have noticed already, 2.6.12 is out there now.
>
> I just downloaded it, copied my 2.6.11.2 config over and did a make
> oldconfig. On USB Mon I got the following in the help.
>
> -------------
> If you say Y here, a component which captures the USB traffic
> between peripheral-specific drivers and HC drivers will be built.
> The USB_MON is similar in spirit and may be compatible with Dave
> Harding's USBMon.
>
> This is somewhat experimental at this time, but it should be safe,
> as long as you aren't building this as a module and then removing it.
>
> If unsure, say Y. Do not say M.
>
> USB Monitor (USB_MON) [M/n/?] (NEW)
> --------------
>
> I really like my options. :-)
>
> OK, I have CONFIG_USB as a module, but I really thought that this was
> pretty amusing.
The patch below tries to solve this in a better way.
> -- Steve
cu
Adrian
<-- snip -->
This patch makes the USB_MON less confusing.
Signed-off-by: Adrian Bunk <[email protected]>
---
drivers/usb/Makefile | 4 +++-
drivers/usb/core/hcd.c | 2 +-
drivers/usb/core/hcd.h | 2 +-
drivers/usb/mon/Kconfig | 13 ++++---------
drivers/usb/mon/Makefile | 2 +-
include/linux/usb.h | 2 +-
6 files changed, 11 insertions(+), 14 deletions(-)
--- linux-2.6.12-mm1-full/drivers/usb/mon/Kconfig.old 2005-06-21 16:01:03.000000000 +0200
+++ linux-2.6.12-mm1-full/drivers/usb/mon/Kconfig 2005-06-21 16:02:13.000000000 +0200
@@ -2,13 +2,9 @@
# USB Monitor configuration
#
-# In normal life, it makes little sense to have usbmon as a module, and in fact
-# it is harmful, because there is no way to autoload the module.
-# The 'm' option is allowed for hackers who debug the usbmon itself,
-# and for those who have usbcore as a module.
config USB_MON
- tristate "USB Monitor"
- depends on USB
+ bool "USB Monitor"
+ depends on USB!=n
default y
help
If you say Y here, a component which captures the USB traffic
@@ -17,6 +13,5 @@
Harding's USBMon.
This is somewhat experimental at this time, but it should be safe,
- as long as you aren't building this as a module and then removing it.
-
- If unsure, say Y. Do not say M.
+ as long as you aren't using modular USB and try to remove this
+ module.
--- linux-2.6.12-mm1-full/drivers/usb/Makefile.old 2005-06-21 16:03:35.000000000 +0200
+++ linux-2.6.12-mm1-full/drivers/usb/Makefile 2005-06-21 16:04:27.000000000 +0200
@@ -6,7 +6,9 @@
obj-$(CONFIG_USB) += core/
-obj-$(CONFIG_USB_MON) += mon/
+ifdef CONFIG_USB_MON
+ obj-$(CONFIG_USB) += mon/
+endif
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
--- linux-2.6.12-mm1-full/drivers/usb/mon/Makefile.old 2005-06-21 16:02:29.000000000 +0200
+++ linux-2.6.12-mm1-full/drivers/usb/mon/Makefile 2005-06-21 16:03:09.000000000 +0200
@@ -4,4 +4,4 @@
usbmon-objs := mon_main.o mon_stat.o mon_text.o
-obj-$(CONFIG_USB_MON) += usbmon.o
+obj-$(CONFIG_USB) += usbmon.o
--- linux-2.6.12-mm1-full/include/linux/usb.h.old 2005-06-21 16:04:38.000000000 +0200
+++ linux-2.6.12-mm1-full/include/linux/usb.h 2005-06-21 16:04:44.000000000 +0200
@@ -290,7 +290,7 @@
struct class_device *class_dev; /* class device for this bus */
struct kref kref; /* handles reference counting this bus */
void (*release)(struct usb_bus *bus); /* function to destroy this bus's memory */
-#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+#if defined(CONFIG_USB_MON)
struct mon_bus *mon_bus; /* non-null when associated */
int monitored; /* non-zero when monitored */
#endif
--- linux-2.6.12-mm1-full/drivers/usb/core/hcd.h.old 2005-06-21 16:05:02.000000000 +0200
+++ linux-2.6.12-mm1-full/drivers/usb/core/hcd.h 2005-06-21 16:05:08.000000000 +0200
@@ -410,7 +410,7 @@
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+#if defined(CONFIG_USB_MON)
struct usb_mon_operations {
void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
--- linux-2.6.12-mm1-full/drivers/usb/core/hcd.c.old 2005-06-21 16:05:21.000000000 +0200
+++ linux-2.6.12-mm1-full/drivers/usb/core/hcd.c 2005-06-21 16:05:27.000000000 +0200
@@ -1855,7 +1855,7 @@
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+#if defined(CONFIG_USB_MON)
struct usb_mon_operations *mon_ops;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]