Hi All!
I have a problem with two SATA-Discs. I have an onboard SIL3114 with
four SATA-Ports an onboard NVIDIA with two SATA-Ports - both controllers
are disable via BIOS (and are not detected by Linux)(only for this test
of course - normally I have other HDD on this ports). The only
controller that is found is the add-on controller in a PCI-Slot
(SIL3112). And that is the one I have trouble with.
If I read or write (via dd) from the first one -> no problems. Same
when read or write from the second or when I read (only read!) from both
at the same time. Data-Transfer-Rate is around 45MB/s for one HDD.
The problem occures when I try to write on both discs at the same time.
For example I write /dev/zero to the first one and then start to write
/dev/zero to the second one. The System-Load goes up to 4 with nearly
100% io-wait and nearly no really write-access to the drives.
Any hints?
- no errormessages in syslog
- happens with Kernel 2.6.11.7 and with 2.6.12-rc5
- HDDs are Samsung Spinpoint 200GB
- (I use the SCSI-SATA-Drivers)
- anything else you need?
Thanks
Tobias
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
