Hi
I've just booted into 2.6.12-rc5-mm1 and it oopses emidatly after starting
rhymbox. Here is the ksymoops and ver_linux report. I'm more then willing to test patches.
Sould I try to pull the latest alsa patches?
ksymoops 2.4.9 on i686 2.6.12-rc5-mm1. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.12-rc5-mm1/ (default)
-m /boot/System.map (specified)
Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Unable to handle kernel paging request at virtual address 00006584
c02e9a26
*pde = 00000000
Oops: 0002 [#1]
CPU: 0
EIP: 0060:[<c02e9a26>] Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282 (2.6.12-rc5-mm1)
eax: 000064e0 ebx: f43bc8c0 ecx: f19753b0 edx: c02e9a20
esi: f1975c78 edi: f78c7040 ebp: f1975c78 esp: f3677f74
ds: 007b es: 007b ss: 0068
Stack: c01412d1 00000000 f78c7040 c014291e b3cfd000 b3ced000 c0142c67 b3ced000
b3cfd000 f1975a68 f78c7040 f78c7070 00000002 f3676000 c0142ccf b3ced000
00000002 c0102ba5 b3ced000 00010000 b3de8298 00000002 00000002 bf88fb78
Call Trace:
[<c01412d1>] remove_vm_struct+0x61/0x70
[<c014291e>] unmap_vma_list+0xe/0x20
[<c0142c67>] do_munmap+0xe7/0x110
[<c0142ccf>] sys_munmap+0x3f/0x60
[<c0102ba5>] syscall_call+0x7/0xb
Code: 74 24 08 89 f8 8b 6c 24 10 8b 7c 24 0c 83 c4 14 c3 8d 74 26 00 8b 40 50 8b 40 60 ff 80 a4 00 00 00 c3 8d 76 00 8b 40 50 8b 40 60 <ff> 88 a4 00 00 00 c3 51 52 e8 cc ca 07 00 5a 59 e9 32 c6 ff ff
>>EIP; c02e9a26 <snd_pcm_mmap_data_close+6/d> <=====
>>ebx; f43bc8c0 <pg0+33f088c0/3fb4a400>
>>ecx; f19753b0 <pg0+314c13b0/3fb4a400>
>>edx; c02e9a20 <snd_pcm_mmap_data_close+0/d>
>>esi; f1975c78 <pg0+314c1c78/3fb4a400>
>>edi; f78c7040 <pg0+37413040/3fb4a400>
>>ebp; f1975c78 <pg0+314c1c78/3fb4a400>
>>esp; f3677f74 <pg0+331c3f74/3fb4a400>
Trace; c01412d1 <remove_vm_struct+61/70>
Trace; c014291e <unmap_vma_list+e/20>
Trace; c0142c67 <do_munmap+e7/110>
Trace; c0142ccf <sys_munmap+3f/60>
Trace; c0102ba5 <syscall_call+7/b>
This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.
Code; c02e99fb <snd_pcm_hw_params_old_user+ab/c0>
00000000 <_EIP>:
Code; c02e99fb <snd_pcm_hw_params_old_user+ab/c0>
0: 74 24 je 26 <_EIP+0x26>
Code; c02e99fd <snd_pcm_hw_params_old_user+ad/c0>
2: 08 89 f8 8b 6c 24 or %cl,0x246c8bf8(%ecx)
Code; c02e9a03 <snd_pcm_hw_params_old_user+b3/c0>
8: 10 8b 7c 24 0c 83 adc %cl,0x830c247c(%ebx)
Code; c02e9a09 <snd_pcm_hw_params_old_user+b9/c0>
e: c4 14 c3 les (%ebx,%eax,8),%edx
Code; c02e9a0c <snd_pcm_hw_params_old_user+bc/c0>
11: 8d 74 26 00 lea 0x0(%esi),%esi
Code; c02e9a10 <snd_pcm_mmap_data_open+0/10>
15: 8b 40 50 mov 0x50(%eax),%eax
Code; c02e9a13 <snd_pcm_mmap_data_open+3/10>
18: 8b 40 60 mov 0x60(%eax),%eax
Code; c02e9a16 <snd_pcm_mmap_data_open+6/10>
1b: ff 80 a4 00 00 00 incl 0xa4(%eax)
Code; c02e9a1c <snd_pcm_mmap_data_open+c/10>
21: c3 ret
Code; c02e9a1d <snd_pcm_mmap_data_open+d/10>
22: 8d 76 00 lea 0x0(%esi),%esi
Code; c02e9a20 <snd_pcm_mmap_data_close+0/d>
25: 8b 40 50 mov 0x50(%eax),%eax
Code; c02e9a23 <snd_pcm_mmap_data_close+3/d>
28: 8b 40 60 mov 0x60(%eax),%eax
This decode from eip onwards should be reliable
Code; c02e9a26 <snd_pcm_mmap_data_close+6/d>
00000000 <_EIP>:
Code; c02e9a26 <snd_pcm_mmap_data_close+6/d> <=====
0: ff 88 a4 00 00 00 decl 0xa4(%eax) <=====
Code; c02e9a2c <snd_pcm_mmap_data_close+c/d>
6: c3 ret
Code; c02e9a2d <.text.lock.pcm_native+0/1d3>
7: 51 push %ecx
Code; c02e9a2e <.text.lock.pcm_native+1/1d3>
8: 52 push %edx
Code; c02e9a2f <.text.lock.pcm_native+2/1d3>
9: e8 cc ca 07 00 call 7cada <_EIP+0x7cada>
Code; c02e9a34 <.text.lock.pcm_native+7/1d3>
e: 5a pop %edx
Code; c02e9a35 <.text.lock.pcm_native+8/1d3>
f: 59 pop %ecx
Code; c02e9a36 <.text.lock.pcm_native+9/1d3>
10: e9 32 c6 ff ff jmp ffffc647 <_EIP+0xffffc647>
1 error issued. Results may not be reliable.
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux the-penguin 2.6.12-rc5-mm1 #20 Thu May 26 09:17:46 PDT 2005 i686 GNU/Linux
Gnu C 3.3.6
Gnu make 3.80
binutils 2.15
util-linux 2.12p
mount 2.12p
module-init-tools 3.2-pre1
e2fsprogs 1.38-WIP
reiserfsprogs line
reiser4progs line
xfsprogs 2.6.28
quota-tools 3.12.
nfs-utils 1.0.7
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.2.5
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.2.1
Modules Loaded cifs deflate zlib_deflate zlib_inflate twofish serpent aes_i586 blowfish des sha256 sha1 md5 crypto_null binfmt_misc ipv6 snd_via82xx snd_ac97_codec snd_mpu401_uart snd_rawmidi ehci_hcd uhci_hcd sk98lin ohci1394 ieee1394 tun nls_iso8859_15 nls_utf8 nls_iso8859_1 nls_cp437 nls_cp950 radeon drm amd64_agp agpgart sg sr_mod ide_scsi ide_cd cdrom via82cxxx ide_core skge mii
--
*--* Mail: [email protected]
*--* Voice: 425.739.4247
*--* Fax: 425.827.9577
*--* HTTP://the-penguin.otak.com/~lawrence
--------------------------------------
- - - - - - O t a k i n c . - - - - -
Attachment:
signature.asc
Description: Digital signature
- Follow-Ups:
- Re: oops report 2.6.12-rc5-mm1
- From: Lee Revell <[email protected]>
- Re: oops report 2.6.12-rc5-mm1
- Prev by Date: Re: [RFC/PATCH 2/4] fs/mm: execute in place (3rd version)
- Next by Date: Re: Playing with SATA NCQ
- Previous by thread: [git patch] 2.6.x libata fix
- Next by thread: Re: oops report 2.6.12-rc5-mm1
- Index(es):
 |